ARI
325L
Construction II
Instructor: Lois Weinthal
Prerequisite: ARC 415K
Time and Place: T,TH
3:30-5pm
Studio/Office: SUT
2.118
Phone: 471-0731
Email: weinthal@mail.utexas.edu
Office hours: by
appointment
COURSE DESCRIPTION
The interior is a space we visually observe and physically engage. Behind the
surface of the wall is a system of materials that holds up the finishes. This
course will address materials that construct an interior space that bridge the
interior to the exterior.
Through this course, we will engage the materials both visually and physically.
We will engage the materials through use and codes that govern the assemblage
of materials along with safety for the occupants. The combination of these two
ways of knowing will be revealed through a series of assigned construction
document drawings.
We will use case studies of famous interiors throughout history in order to
understand the assemblage and codes that govern these spaces through
construction drawings. We will test these spaces in order to see if these great
interiors abide by the codes. For example, we will see if Charles Garniers
famous staircase in the Paris Opera follows the codes required for fire safety
evacuation, if not, we will design a solution to the proposed problem.
Students will be asked to investigate materials and codes that shape interior
spaces. These studies will take place in the form of demonstrations with
materials and how they are shaped by understanding their properties and using
the tools that alter them. Students will be asked to investigate and implement
interior codes that relate to fire safety issues, means of egress, plumbing,
electrical and mechanical through exams and construction document drawings.
This course aims to bridge the understanding of construction covered in
Construction I to the finish materials covered in Construction III.
FROM THE CATALOG:
325L. Construction II
Restricted to students in the School of Architecture. Studies and interaction
with interior building materials and interior codes including fire safety and
means of egress. Prerequisite: ARC 415K Construction I with a grade of C or
better.
OBJECTIVES:
demonstrate design development skills of:
-wayfinding methods and graphic identification such as signage
demonstrate exposure to:
-competent skills in preparation of contract documents as a system of drawing,
schedules, and specifications in examples of construction/demolition plans,
lighting/reflected ceiling plans, finish plans, furniture, fixtures, equipment
plans, data/voice telecommunications plans
demonstrate knowledge and understanding of:
- drawing and lettering
- construction systems and methods (ex. wood frame, steel frame, masonry,
concrete)
demonstrate some understanding of:
-mechanical systems (HVAC, plumbing) and energy management
demonstrate knowledge of the appropriate application of fire and life safety
principles including: - compartmentalization (fire separation), movement
(stairwells, corridors, exit-ways), detection (smoke/heat )
detectors and alarm systems), suppression (sprinklers/fire hose cabinets)
demonstrate some understanding of the appropriate application of:
- codes, regulations, standards (ex. UBC, NBC) and barrier free design concepts
(ex. American with Disabilities Act)
exposure to:
-ergonomic and human factors data
demonstrate:
-active listening skills leading to effective interpretation of requirements
METHODS: Course
material will be introduced through lectures based on the reading assignments
found on the calendar along with case studies of interiors with slides.
Material demonstrations will take place in the wood shop. Students will be
given advance notice of where classes are to be held.
REQUIRED TEXT:
Building Construction Illustrated, 3rd Edition, Francis D. Ching, John Wiley
& Sons Inc. New York 2001.
TEXT FOR REFERENCE:
The Codes Guidebook for Interiors, 2nd Edition, Sharon Koomen Harmon, John
Wiley & Sons Inc. New York 2001
SCHEDULE:
Part I: Construction Terms, Framing, Materials
Part II: Means of Egress and Fire Safety
Part III: Mechanical, Plumbing, Electrical
REQUIRED COURSE WORK:
Three exams will be given throughout the semester, each relating to the
material covered in Parts I, II and III on the above schedule. In addition, a
series of Construction Documents (CDs) will be assigned also relating to the
three parts above. One group project will be assigned involving a presentation
of materials and assemblies to be presented in class through slides, power
point, etc.
ADDITIONAL REQUIREMENTS:
In order to better understand interior materials, assemblies and systems, field
trips may be taken throughout the semester.
It is anticipated that this course will require an additional 6 hours per week,
approx., outside of the scheduled class period to satisfactorily complete the
work.
GRADING:
Exam #1 20%
Exam #2 20%
Exam #3 20%
Slides - group project 10%
CD #1 5%
CD #2 10%
CD #3 15%
TOTAL 100%
Additional grading for the above will be based upon completeness of work,
effort and interest. Late work will be accepted 24 hours past the due date and
time but it will receive a 10% penalty.
COURSE POLICIES
Class Conduct:
Please turn off all cell phones or pagers during class time. Show consideration
for University Property; please do not leave cups, cans, bottles, etc. in the
room after class has ended. Office Hours
Regular hours are listed within the Course Syllabus. You may also schedule a
separate appointment if needed. Email is now often used to schedule times,
provide additional information for the studio, or to answer/ask questions,
though there is no guarantee as to when the instructor will receive that email.
Attendance
Be on time. THREE LATE ARRIVALS will constitute an absence. Arrival 30 minutes
after roll is taken will be counted as an absence.
Sometimes an illness or other circumstances may cause you to miss class. You
are allowed THREE absences for the semester. Missing extensive days in studio
results in a significant impact to your work, and to your participation in the
studio. EACH ABSENCE, FOR ANY REASON (except in rare extenuating circumstances
requiring department approval) BEYOND THREE WILL RESULT IN A REDUCTION OF YOUR
FINAL EARNED GRADE BY A LETTER GRADE POINT. It is best to save your three
excused absences for times when they are actually needed. A letter from a
doctor will be required.
The instructor will always provide the courtesy of informing you if they will
not be able to attend a class meeting; as such, YOU ARE EXPECTED TO INFORM YOUR
INSTRUCTOR of any impending absence, if possible, either in advance in class,
by emailing prior to class, or by calling the department office.
STUDENTS WITH TWO CONSECUTIVE UNEXCUSED ABSENCES WILL BE DROPPED FROM THE
COURSE.
Completion of Work
Final work must satisfy, in some way, all requirements as outlined in the
problem and exercise statements.
An incomplete will be given only in rare cases, and for non-academic reasons
that will require prior approval.
GENERAL UNIVERSITY POLICIES
Students with Disabilities
Please notify your instructor of any adaptation you may require to accommodate
a specific physical need. You will be requested to provide documentation to the
Dean of Students' Office, in order that the most appropriate accommodations can
be determined. Specialized services are available on campus through the
Services for Students with Disabilities, also found via the web at
http://www.utexas.edu.
Academic Integrity
Cheating is not tolerated at UT. Plagiarism is the most common form of academic
dishonesty. Students can be suspended or expelled permanently from the
University for scholastic dishonesty. Information regarding the policies can be
found at http://www.utexas.edu/depts/dos/sjs/academicintegrity.html
Adding and Dropping the Course
Xxxday, XXXX is the last day of the official add/drop period; after this date,
changes in registration require the approval of the chairman and usually the
students' dean. Xxxxday, XXXX is the twelfth class day; this is the date the
official enrollment count is taken. It is the last day an undergraduate student
may add a course except for rare and extenuating circumstances, and is the last
day to drop a course for a possible refund. (See General Information in the
Catalog for required approvals)
No smoking at any time during class. Alcohol and Drugs are not permitted in
class at any time and possession or use warrants immediate expulsion from the
course (see general catalog for further University policies).
GRADING INDICATORS
Completion of Work:
Final work must satisfy, in some way, all requirements as outlined in the
problem and exercise statements. All project hand-outs will clearly state what
the criteria for evaluation is.
Deadlines will be established for all assignments.
Late work will be accepted within 24 hours past the due date and time, but will
receive a 10 point penalty. After 24 hours, the lateness will constitute a
failing grade for that aspect of the assignment.
An incomplete will be given only in rare cases, and for non-academic reasons
that will require prior approval.